Topcoat2018-05-28T06:29:07+00:00
L.Co Finishes | Premium interior and exterior tung oil based finishes made in Vietnam

Topcoat

Home / Products / Interior / Topcoat

L.Co Topcoat is best used on interior surfaces that will have moderate to heavy use such as flooring, tabletops and cabinets. L.Co Topcoat is very durable and provides excellent scratch, water and chemical resistance. Best of all, it still looks completely natural because we use raw tung and linseed oils which are absorbed into the wood, emphasizing its natural figure. We formulate our Topcoat with a higher percentage of resin which gives added protection to your projects and also a faster drying time. L.Co recommends pre-treating and sealing the wood substrate with Tung Oil Finish prior to topcoating for unbeatable longevity.

L.Co Finishes | Premium interior and exterior tung oil based finishes made in Vietnam

Available in High Gloss, Semi Gloss and Matte sheens.

Product Uses

Use on interior wood surfaces including floors, windows, doors, cabinetry, woodwork, tables, furniture, bar tops, picture frames and various woodworking projects. Provides exceptional adhesion to oily, dense woods like teak, yellow balau, rosewood, and walnut.

Product Details

Description:
L.Co’s Topcoat is a fast drying varnish that provides excellent abrasion resistance and chemical resistance for high traffic/ high wear interior projects such as chairs, table-top surfaces, parquet flooring, wooden staircases and kitchen and bathroom cabinets. L.Co Topcoat is formulated with soy oil, tung oil and linseed oil which adds a richness rarely seen in a fast drying topcoat.

New wood application:
Prepare the surface of the wood by sanding with 180 grit sandpaper. Mix varnish well before and during application and apply with a soft cotton rag, foam brush, or spray gun in quick and light coats. Allow surface to completely dry 2-4 hours before applying additional coats. Lightly sand with 400 grit sandpaper between coats.

Repair | Maintenance:
Prepare the surface by cleaning with mineral spirits or turpentine, lightly sand with 400 grit sandpaper and re-coat referring to the instructions above.

Clean up:
Clean application tools immediately with mineral spirits or turpentine. Properly dispose of rags, applicators and waste.

Coverage | Thinning:
4 Liters covers 40 square meters per coat. One Liter covers 10 square meters per coat. The number of coats depends upon the porosity of the wood. No thinning necessary.

Dry time*:
Allow surface to completely dry 2-4 hours before applying additional coats. Poor ventilation, high humidity or cool temperatures may increase dry times. *See our support page for more information on drying and curing.

Ingredients:
Mineral spirits, modified alkyd resin, raw tung oil, double boiled linseed oil, dryers, modified wax (in semi-gloss and matte sheens).

Non-toxic when fully cured.

Product Support

Do NOT follow this link or you will be banned from the site!