Oil Treatment2018-05-28T06:26:14+00:00
L.Co Finishes | Premium interior and exterior tung oil based finishes made in Vietnam

Exterior Oil Treatment

Home / Products / Exterior / Exterior Oil Treatment

L.Co Exterior Oil Treatment is an exterior deep oil pre-treatment and wood conditioner that is applied to new wood prior to using L.Co Exterior Varnish. Using our Exterior Oil Treatment has been shown to significantly reduce cracking, helps prevent discoloration and extends the life of finishing on outdoor surfaces such as fencing, railings, patio furniture, siding, doors, boats and marine surfaces. LCo Exterior Oil Treatment is formulated with maximum UV absorbers and a high percentage of raw tung and linseed oils.

L.Co Finishes | Premium interior and exterior tung oil based finishes made in Vietnam

An exterior pre-treatment conditioner and sealer all in one.

Product Uses

L.Co’s Exterior Oil Treatment is an exterior deep oil pre-treatment and wood conditioner that is applied to new wood prior to using L.Co Exterior Varnish. Using our Exterior Oil Treatment has been shown to significantly reduce cracking, helps prevent discoloration and extends the life of finishing on outdoor surfaces such as fencing, railings, patio furniture, siding, doors, boats and marine surfaces. LCo Exterior Oil Treatment is formulated with maximum UV absorbers and a high percentage of raw tung and linseed oils.

Product Details

Description:
L.Co Exterior Oil Treatment has been formulated for use on outdoor surfaces such as fencing, railings, patio furniture, siding, doors, boats and marine surfaces to withstand water and harsh weather conditions. Using a blend of tung oil, linseed oil, ultra violet absorbers and resin in conjunction with L.Co Exterior Varnish, your furniture will be well protected with a barrier that helps to prevent weathering, cracking and discoloration of wood that is placed outside.

New wood application:
Prepare the surface of the wood by sanding with 180 grit sandpaper. Mix varnish well before and during application and apply with a soft cotton rag or foam brush in quick and light coats. Allow surface to completely dry 2-4 hours before applying additional coats. Lightly sand with 400 grit sandpaper between coats.

Repair | Maintenance:
Prepare the surface by cleaning with mineral spirits or turpentine, lightly sand with 400 grit sandpaper and re-coat referring to the instructions above.

Clean up:
Clean application tools immediately with mineral spirits or turpentine. Properly dispose of rags, applicators and waste.

Coverage | Thinning:
4 Liters covers 40 square meters per coat. One Liter covers 10 square meters per coat. The number of coats depends upon the porosity of the wood. No thinning necessary.

Dry time*:
Allow surface to completely dry 2-4 hours before applying additional coats. Poor ventilation, high humidity, cool temperatures and subsequent coats may have increased dry times. *See our support page for more information on drying and curing.

Ingredients:
Mineral spirits, modified alkyd resin, raw tung oil, double boiled linseed oil, UV absorbers, dryers, modified wax (in semi-gloss and matte sheens).

Non-toxic when fully cured.

Product Support

Do NOT follow this link or you will be banned from the site!